Bandini 1000 P

From WOI Encyclopedia Italia
Revision as of 12:58, 30 May 2008 by WikiSysop (talk | contribs)
Jump to navigation Jump to search

TheBandini 1000 P is a car racing, built from 1959 1965 from Bandini Cars Forlì.

Bandini1000 P.JPG


This new type of car, marks a radical change in the philosophy of approach to the completion of auto racing Bandini. If the objectives: speed, lightness and road holding remains unchanged, different is the way in which they are pursued.

The weight always enemy of speed and ally of Bandini, was upset in its distribution, moving to the rear for the first time, the entire power-exchange-differential. This turning point underlying the definition of a draft vehicle, is opposed by the competitiveness of "Saponetta" 1000 cc. Particularly in races uphill, this is the first real opponent and touchstone for the1000motor rear, with which it shares the engine Bandini 1000 cm ³, which in 1962, already reaches the 98 CV @ 8500 rpm.

The debut of the first prototype motor back in fact, dates back to 1959 to the circuit with engine Cesenatico 850 cm ³ engine capacity (the first to use exclusively mergers Bandini) and the following year with the new engine 1000 cm ³.

With the1000we P an important novelty but also the return to the final four-wheel independent. The geometry of the rear suspension, tested on a copy of Formula Junior , is totally different than the first Bandini, 1946 And will be used for the types thereafter.

Benelli on Bandini 1000 (1965)


The Frame

1000 bandini.jpg

The chassis, designed and built by Ilario Bandini, uses the same type of material types earlier but the design allows you to reach the incredible weight of only 16 kg.

  • Structure and material: a tower pipe section elliptical, steel special derivation aeronautics; patent No. 499843
  • Suspensions:
    • Front: Independent, triangles overlapping with shock hydraulic telescopic tilted and springs cylindrical helical coaxial; bar Account
    • Rear: independent, arms swinging and lower triangles on which the act shock hydraulic telescopic tilted and springs cylindrical helical coaxial, camber caster and convergence adjustable bar Account
1000bandini1.JPG


Engine Bandini Bialbero 1000

The engine Bandini bialbero 1000 cm ³
  • Positioning: longitudinal rear, 4-cylinder in-line
  • Materials and specifics: a mixed distribution: chain gears, double camshaft head alloy aluminium, 8 valves, chamber burst hemisphere, monoblock and [ [basement]] to five media bench unique fusion of aluminium, sump in Light, reeds of cylinders in iron chrome and detachable
  • Bore: 68 mm
  • Running: 68 mm
  • Capacity: 987 cm ³
  • Compression ratio: 9,5:1
  • Power: 2 Weber carburetors double body 38DCO3
  • Power: 98 CV @ 8500 rpm
  • Lubricate: Carter with wet gear pump and filter external radiator in aluminium
  • Cooling: forced liquid with centrifugal pump-driven belt and pulley, aluminum radiator all'avantreno
  • Currency and clutch: 4-speed transmission (the second third and fourth synchronized) + RM clutch monodisco dry
  • Ignition and electrical equipment: coil and distributor switch on the head, battery 12 V and generator


The Body

Ilario Bandini Vinci-S.Baronto 1962
Teodoro Zeccoli in Cesenatico 1959


The bodywork in aluminium two-seater (boat) are built in Forlì by Bandini. Compared with Saponettawhich is the root note stylistic common,1000P lines has more tense and aggressive front end with a very low profile and an almost free variations in height. The headlights arrears, the air-intake and squared prominent, give the impression of being faced with a car that will not wait more than give demonstration of their capabilities. The bonnet rear hull partly also the wheels, is equipped with large grids side as the fin rounded behind the pilot. Ribaltabile forward, allows easy access to the engine compartment. The introduction of roll-bar will force a reversal of opening towards and this is also amended the design of bonnet. Spariscono grids side and the upper fin and open two air-intakes on the area of advanced rear wheel, levitati height compared to centreplane. Even the front undergoes a harmonization with the rear, now, more rotondeggianti. Is reduced lengthwise (so more at the bottom) and enlarged the size of lights, so I have a air-intake less square in shape. The slides covering the headlights are part of continuuità lines of wheel and the overall appearance is more sweet.


Related Items



Bandini Automobili
Barchette: "La prima" 1100/46 | 1100 sport | 1100 Siluro (Torpedo) | Bandini-Maserati 1500 | 750 sport Siluro (Torpedo) | 750 sport internazionale "saponetta"

Formula: Formula 3 | Formula junior
GT: 750 GT Zagato | 1000 GT
Sport coupé: Saloncino | Berlinetta 1000 turbo 16Vi
Sport prototipo: 1000/62 P | 1000/66 sport | 1000/70 V | Mille s.p. | 1300 16Vi
The Ilario Bandini Story