Hybrid vehicles

From WOI Encyclopedia Italia
Revision as of 22:42, 15 January 2007 by 67.190.232.58 (talk)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

A hybrid vehicle (HV) is a vehicle using an on-board rechargeable energy storage system (RESS) and a fuelled power source for vehicle propulsion. The HV pollutes less and uses less fuel. The different propulsion power systems may have common subsystems or components. The HV provide better fuel economy than a conventional vehicle because the engine is smaller and may be run at speeds providing more efficiency.

The term most commonly refers to petroleum-electric hybrid vehicles, also called Hybrid-electric vehicle (HEV) which use internal combustion engines and electric batteries to power electric motors. Modern mass-produced hybrids, such as the Toyota Prius, prolong the charge on their batteries by capturing kinetic energy via regenerative braking. As well, when cruising or in other situations where just light thrust is needed, "full" hybrids such as the Prius can use the combustion engine to generate electricity by spinning a generator (often a second electric motor[1]) to either recharge the battery or directly feed power to an electric motor that drives the vehicle. This contrasts with all-electric cars which use batteries charged by an external source such as the grid, or a range extending trailer. Nearly all hybrids still require gasoline and diesel as their sole fuel source though other fuels such as ethanol or plant based oils have also seen occasional use. A number of other hybrid vehicles use hydrogen fuel.

The term hybrid when used in relation with cars also has other uses. Prior to its modern meaning of hybrid propulsion, the word hybrid was used in the United States to mean a vehicle of mixed national origin; generally, a European car fitted with American mechanical components. This meaning has fallen out of use. In the import scene, hybrid was often used to describe an engine swap, such as the common Honda B16 engine into a Honda Civic. Some have also referred to flexible-fuel vehicles as hybrids because they can use a mixture of different fuels — typically gasoline and ethanol alcohol fuel.

History

In 1898 Ferdinand Porsche designed the Lohner-Porsche carriage, a series-hybrid vehicle that used a one-cylinder gasoline internal combustion engine that spun a generator which powered four wheel-mounted electric motors. The car was presented at the 1900 World Exhibition in Paris. The up to 56 km/h (35 mph) fast carriage broke several Austrian speed records, and also won the Exelberg Rally in 1901 with Porsche himself driving. Over 300 of the Lohner-Porsche carriages were sold to the public. Altough this is more an example of electrical transmission than a hybrid vehice.

The 1915 Dual Power made by the Woods Motor Vehicle electric car maker had a four cylinder internal combustion engine and an electric motor. Below 15 mph (25 km/h) the electric motor alone drove the vehicle and above this speed the "main" engine cut in to take the car up to its 35 mph (55 km/h) top speed. About 600 were made up to 1918. [2]

There have also been air engine hybrids where a small petrol engine powered a compressor. Several types of air engines also increased the range between fill-ups with up to 60% by absorbing ambient heat from its surroundings. [1]

In 1959 the development of the first transistor-based electric car - the Henney Kilowatt - heralded the development of the electronic speed control that paved the way for modern hybrid electric cars. The Henney Kilowatt was the first modern production electric vehicle and was developed by a cooperative effort between National Union Electric Company, Henney Coachworks, Renault, and the Eureka Williams Company. Although sales of the Kilowatt were dismal, the development of the Kilowatt served was a historical "who's who" of electric propulsion technology.

A more recent working prototype of the electric-hybrid vehicle was built by Victor Wouk (one of the scientists involved with the Henney Kilowatt and also brother of author Herman Wouk ). Wouk's work with electric hybrid vehicles in the 1960s and 1970s earned the title as the "Godfather of the Hybrid"[3]). Wouk installed a prototype electric-hybrid drivetrain into a 1972 Buick Skylark provided by GM for the 1970 Federal Clean Car Incentive Program, but the program was killed by the EPA in 1976. Since then, hobbyists have continued to build hybrids but none was put into mass production by a major manufacturer until the waning years of the twentieth century.

The regenerative-braking hybrid, the core design concept of most production hybrids, was developed by Electrical Engineer David Arthurs around 1978 using off-the shelf components and an Opel GT. However the voltage controller to link the batteries, motor (a jet-engine starter motor), and DC generator was Mr. Arthurs'. The vehicle exhibited ~75 mpg fuel efficiency and plans for it (as well as somewhat updated versions) are still available through the Mother Earth News web site. The Mother Earth News' own 1980 version claimed nearly 84 mpg.

The Bill Clinton administration initiated the Partnership for a New Generation of Vehicles (PNGV)[4] program in September 29 1993 that involved Chrysler, Ford, General Motors, USCAR, the DoE, and other various governmental agencies to engineer the next efficient and clean vehicle. The NRC cited automakers’ moves to produce hybrid electric vehicles as evidence that technologies developed under PNGV were being rapidly adopted on production lines, as called for under Goal 2. Based on information received from automakers, NRC reviewers questioned whether the “Big Three” would be able to move from the concept phase to cost effective, pre-production prototype vehicles by 2004, as set out in Goal 3. [Review of the Research Program of the Partnership for a New Generation of Vehicles: Seventh Report, National Research Council, (2001), p. 77].

The program was replaced by the hydrogen focused FreedomCAR initiative[5] of George W. Bush's administration in 2001. The focus of the FreedomCAR initiative being to fund research too high risk for the private sector to engage in with the long term goal of developing emission / petroleum free vehicles.

In the intervening period, the widest use of hybrid technology was actually in diesel-electric locomotives. It is also used in diesel-electric submarines, which operate in essentially the same manner as hybrid electric cars. However, in this case the goal was to allow operation underwater without consuming large amounts of oxygen, rather than economizing on fuel. Since then, many submarines have moved to nuclear power, which can operate underwater indefinitely, though a number of nations continue to rely on diesel-electric fleets.

Automotive hybrid technology became successful in the 1990s when the Honda Insight and Toyota Prius became available. These vehicles have a direct linkage from the internal combustion engine to the driven wheels, so the engine can provide acceleration power. The 2000s saw development of plug-in hybrid electric vehicles (PHEVs), which can be recharged from the electrical power grid and do not require conventional fuel for short trips. The Renault Kangoo was the first production model of this design, released in France in 2003. However, the environmental benefits of plug-in hybrids depend somewhat on the source of the electrical power. In particular, electricity generated with wind would be cleaner than electricity generated with coal, the most polluting source. On the other hand, electricity generated with coal in a central power plant is still much cleaner than pure gasoline propulsion, due to the much greater efficiencies of a central plant. Furthermore, coal is only one source of centrally generated power, and in some places such as California is only a minor contributor, overshadowed by natural gas and other cleaner sources.

The Prius has been in high demand since its introduction. Newer designs have more conventional appearance and are less expensive, often appearing and performing identically to their non-hybrid counterparts while delivering 50% better fuel efficiency. The Honda Civic Hybrid appears identical to the non-hybrid version, for instance, but delivers about 50 US mpg (4.7 L/100km). The redesigned 2004 Toyota Prius improved passenger room, cargo area, and power output, while increasing energy efficiency and reducing emissions. The Honda Insight, while not matching the demand of the Prius, is still being produced and has a devoted base of owners. Honda has also released a hybrid version of the Accord.

2005 saw the first hybrid SUV released, Ford Motor Company's Ford Escape Hybrid. Toyota and Ford entered into a licensing agreement in March 2004 allowing Ford to use 20 patents from Toyota related to hybrid technology, although Ford's engine was independently designed and built. In exchange for the hybrid licences, Ford licensed patents involving their European diesel engines to Toyota. Toyota announced model year 2005 hybrid versions of the Toyota Highlander and Lexus RX 400h with 4WD-i which uses a rear electric motor to power the rear wheels negating the need for a differential. Toyota also plans to add hybrid drivetrains to every model it sells in the coming decade.

For 2007 Lexus is offering a hybrid version of their GS sport sedan dubbed the GS450h with "well in excess of 300hp". The 2007 Camry Hybrid has been announced and is slated to launch in late Spring as a 2007 model. It will be built in Kentucky, USA. Also, Nissan announced the release of the Altima hybrid (technology supplied by Toyota) around 2007.

An R.L. Polk survey of 2003 model year cars showed that hybrid car registrations in the United States rose to 43,435 cars, a 25.8% increase from 2002 numbers. California, the nation's most populous state at one-eighth of the total population, had the most hybrid cars registered: 11,425. The proportionally high number may be partially due to the state's higher gasoline prices and stricter emissions rules, which hybrids generally have little trouble passing.

Honda, which offers Insight, Civic and Accord hybrids, sold 26,773 hybrids in the first 11 months of 2004. Toyota has sold a cumulative 306,862 hybrids between 1997 and November 2004, and Honda has sold a total of 81,867 hybrids between 1999 and November 2004.[6]

Hybrids currently available

Template:Main Template:Rellink

Trains, trucks and buses

In May 2003 JR East started test runs with the so called NE (new energy) train and validated the system's operability (series hybrid with lithium ion battery) in cold regions. In 2004, RailPower Technologies had been running pilots in the US with the so called Green Goats which led to orders by the Union Pacific and Canadian Pacific Railways starting in early 2005[2],[3],[4].

Also in 2005 GE introduced its hybrid shifters on the market. Toyota claims to have started with the Coaster Hybrid Bus in 1997 on the Japanese market. In May 2003 GM started to tour with hybrid buses developed together with Allison. Several hundreds of those buses have entered into daily operation in the US. The Blue Ribbon City Hybrid bus was presented by Hino, a Toyota affiliate, in January 2005.

In 2003 GM introduced a diesel hybrid military (light) truck, equipped with a diesel electric and a fuel cell auxiliary power unit. Hybrid light trucks were introduced 2004 by Mercedes (Hybrid Sprinter) and Micro-Vett SPA (Daily Bimodale). International Truck and Engine Corp. and Eaton Corp. have been selected to manufacture diesel-electric hybrid trucks for a US pilot program serving the utility industry in 2004. In mid 2005 Isuzu introduced the Elf Diesel Hybrid Truck on the Japanese Market. They claim that approximately 300 vehicles, mostly route buses are using Hinos HIMR (Hybrid Inverter Controlled Motor & Retarder) system.

A promising but as-yet unseen application for hybrid vehicle technology would be in garbage trucks, since these vehicles do stop-start driving and often stand idling.

Taxicabs

In 2005, New York City added six Ford Escape Hybrids to their taxi fleet and city officials said the entire fleet of 13,000 vehicles could be converted within five years.[7]

Types

There are many ways to create an electric-internal combustion hybrid. The variety of electric-ICE designs can be differentiated by how the electric and combustion portions of the powertrain connect, at what times each portion is in operation, and what percent of the power is provided by each hybrid component. Two major categories are series hybrids and parallel hybrids, though parallel designs are most common today.

Most hybrids, no matter the specific type, use regenerative braking to recover energy when slowing down the vehicle. This simply involves driving a motor so it acts as a generator.

Many designs also shut off the internal combustion engine when it is not needed in order to save energy. That concept is not unique to hybrids; Subaru pioneered this feature in the early 1980s, and the Volkswagen Lupo 3L is one example of a conventional vehicle that shuts off its engine when at a stop. Some provision must be made, however, for accessories such as air conditioning which are normally driven by the engine. Furthermore, the lubrication systems of internal combustion engines are inherently least effective immediately after the engine starts; since it is upon startup that the majority of engine wear occurs, the frequent starting and stopping of such systems reduce the lifespan of the engine considerably. Also, start and stop cycles may reduce the engine's ability to operate at its optimum temperature, thus reducing the engine's efficiency.

Series

In a series design, the internal combustion engine is not directly connected to the drivetrain at all, but powers an electrical generator instead. This is similar to the operation of diesel-electric train locomotives, except that as of 2006, the overwhelming majority of diesel-electric locomotives do not store auxiliary power in batteries for use in propulsion, and thus can not be called "hybrid" vehicles. This may change if capacitators (Super or Ultracaps) are used to act as short term storage which is the case for shunting locomotives in the US by Rail Power Technologies [5] and motorized units at JR-East. A series hybrid is similar to an electric car which is recharged by electricity from a stationary fossil fuel power plant, except that the power plant is carried on board.

Electricity from the generator is fed to the motor or motors that actually move the car, and excess energy can be used to charge batteries. When large amounts of power are required, electricity comes from both the battery pack and the engine-generator section. Because electrical motors can operate quite efficiently over a wide range of speeds, this design removes or reduces the need for a complex transmission. The internal combustion engine can also be finely tuned to operate at its most efficient speed whenever it is running, for a great gain in efficiency. Separate small electric motors installed at each wheel are featured in some prototypes and concept cars; this allows the possibility of easily controlling the power delivered to each wheel, and therefore simplifies traction control, all wheel drive, and similar features.

The advantage of this type of hybrid is the flexibility afforded by the lack of a mechanical link between the internal combustion engine and the wheels. A weakness of a series hybrid system, however, is that series hybrids require separate motor and generator portions, which can be combined in some parallel hybrid designs; the combined efficiency of the motor and generator will be lower than that of a conventional transmission, offsetting the efficiency gains that might otherwise be realized. Additionally, the power delivered to the wheels by a series hybrid is limited by the electric motor(s) (which can be overloaded for a limited time however), whereas in a parallel hybrid both the combustion engine and the electric motor can provide power to the wheels.

The use of a motor per wheel eliminates the conventional mechanical transmission elements (gearbox, transmission shafts, differential). However, when the motor is integrated into the wheel, it increases the unsprung masses and for better ride characteristics the motors may be fixed to the vehicle body, which requires the use of flexible couplings to the wheels. Also, mechanical brakes need to be fitted to the wheels for safety reasons. The use of wheel motors is particularly interesting in vehicles such as urban buses, where it may facilitate the adoption of an all-low-floor design, as well as in all-wheel drive vehicles such as military vehicles (up to 8x8) where it simplifies mechanical design.

Series hybrids are the most efficient in driving cycles that incorporate many stops and starts, such as for delivery vehicles, urban buses or stop and go city driving. In such vehicle use, the combustion engine can deliver power at a constant and more efficient rate. For long-distance highway driving however, the addition of losses in the electric transmission comes forward and a parallel hybrid may be more advisable.

Fuel cell vehicles are often fitted with a battery or supercapacitor to deliver peak acceleration power and to reduce the size and power constraints on the fuel cell; this is effectively also a series-style setup.

Parallel

Parallel systems, which are most commonly produced at present, connect both the electrical and internal combustion systems to the mechanical transmission. They can be subcategorized depending upon how balanced the different portions are at providing motive power. In some cases, the internal combustion engine is the dominant portion and is used for primary power, with the motor turning on only when a boost is needed. Others can run with just the electric system operating alone. Most designs combine a large electrical generator and a motor into one unit, often situated between the internal combustion engine and the transmission, in the location of the flywheel, replacing both the conventional starter motor and the generator or alternator. A large battery pack is required, providing a higher voltage than the normal automotive 12 volts. Accessories such as power steering and air conditioning are powered by electric motors, so that they continue to function when the internal combustion engine is stopped; this offers the possibility of further efficiency gains, by modulating the electrical power delivered to these systems, rather than having them run directly from the engine at a speed which depends on engine speed.

Full hybrid

A full hybrid, sometimes also called a strong hybrid, is a vehicle that can run on just the engine, just the batteries, or a combination of both. The Prius and Escape Hybrids are examples of this, as both cars can be moved forward on battery power alone. A large, high-capacity battery pack is needed for battery-only operation. These vehicles have a split power path that allows more flexibility in the drivetrain by interconverting mechanical and electrical power, at some cost in complexity. To balance the forces from each portion, the vehicles use a differential-style linkage between the engine and motor connected to the head end of the transmission.

The Toyota brand name for this technology is Hybrid Synergy Drive, which is being used in the Prius, Highlander sport-utility vehicle (SUV), and Camry. A computer oversees operation of the entire system, determining which half should be running, or if both should be in use, shutting off the internal combustion engine when the electric motor is sufficient to provide the power. The normal mode of operation is on electrical power alone, with the gasoline engine running only in cases where the extra power is required, or where the batteries are discharged. The hybrid drivetrain of the Prius, in combination with aerodynamics and optimizations in the engine itself to reduce drag, results in 80%–100% gains in fuel economy compared to four-door conventional cars of similar weight and size.

Input-split Hybrid

The Toyota Hybrid System THS / Hybrid Synergy Drive mode of operation with only a single power split device (incorporated as a single 3 shaft planetary gearset) is more generically called Input-Split Hybrid, due to the fact that a fixed amount of torque is transferred via the electrical path from the engine to the wheels. This in turn makes this setup very simple in mechanical terms, but does have some drawbacks of its own. For example the maximum speed is mainly limited by the speed of the smaller electric motor. Also, the efficiency of the transmission is heavily dependent on the amount of power being transmitted over the electrical path, as multiple conversions, each with their own, less than perfect efficiency, lead to a low efficiency of that path (~0.7) compared with the purely mechanical path (~0.98). Especially in higher speed regimes (>120 km/h or 70 mph) the efficiency (of the transmission alone) therefore drops below that of a generic automatic transmission with hydrodynamic coupler.

The main principle behind this system is the more-or-less complete decoupling of the power supplied by the engine (or other primary source) from the power demanded by the driver. Thus a smaller, less flexible engine may be used, which is designed for maximum efficiency (often using variations of the conventional Otto cycle, such as the Miller or Atkinson cycle). This contributes significantly to the higher overall efficiency of the vehicle, with regenerative braking playing a much smaller role.

The differing torque vs. rpm characteristics of the internal combustion and electrical motors operate synergistically; an internal combustion engine's torque is minimal at lower RPMs, since the engine must be its own air pump. Thus, the need for reasonably rapid acceleration from a standing start results in an engine which is much larger than required for steady speed cruising. On the other hand, an electrical motor exhibits maximum torque at stall; therefore this engine is well suited to complement the internal combustion engine's torque deficiency at low RPMs, allowing the use of a much smaller and therefore more fuel efficient engine.

Interesting variations of that simple theme, as very well known (implemented in the Toyota Prius) are the

  • addition of a fixed gear second planetary gearset as used in the Lexus RX400h and Toyota Highlander Hybrid. This allows for a motor with less torque but higher power (and higher maximum rotary speed), ie. higher power density
  • addition of a ravigneux-type planetary gear (planetary gear with 4 shafts instead of 3) and two clutches as used in the Lexus GS450h. By switching the clutches, the gear ratio from MG2 (the "drive" motor) to the wheel shaft is switched, either for higher torque or higher speed (up to 250 km/h / 155 mph) while sustaining better transmission efficiency.
Combined-Split Hybrid

General Motors, BMW, and DaimlerChrysler are working together on a so-called Two-Mode Hybrid system which is a full hybrid plus additional efficiency improvements. The technology will be released in 2008 on the Chevrolet Tahoe Hybrid. The system was also featured on the GMC Graphite SUV concept vehicle at the 2005 North American International Auto Show in Detroit.[8]

The main difference to the Input-Split Hybrid is the addition of a second planetary gearset, and the addition of two clutches (which can actually operate as one). This enables the switching (two-modes) of the percentage of mechanically vs. electrically transmitted power, and in order to cope both with low- and high-speed regimes, only smaller electrical motors with much less power and torque can be used. However, no diagrams could be obtained so far explaining the 4 gear-ratios (and why that would impose limits on the concurrent use of both electric motors or not). Most likely, an additional, 3rd ravigneux-like planetary gear with additional clutches is used for shifting between distinct final gear ratios.

Assist hybrid

Engine compartment of a 2006 Mercury Mariner Hybrid

Assist hybrids use the engine for primary power, with a torque-boosting electric motor also connected to a largely conventional powertrain. The electric motor is essentially a very large starter motor, which operates not only when the engine needs to be turned over, but also when the driver "steps on the gas" and requires extra power. Honda's hybrids including the Insight use this design, leveraging their reputation for design of small, efficient gasoline engines; their system is dubbed Integrated Motor Assist (IMA). Assist hybrids differ fundamentally from full hybrids in that they cannot run on electric power alone. However, since the amount of electrical power needed is much smaller, the size of the battery systems is reduced.

A variation on this type is Mazda's e-4WD system, offered on the Mazda Demio sold in Japan. This front-wheel drive vehicle has an electric motor which can drive the rear wheels when extra traction is needed. The system is entirely disengaged in all other driving conditions, so it does not enhance performance or economy.

Ford has dubbed Honda's hybrids "mild" in their advertising for the Escape Hybrid, arguing that the Escape's full hybrid design is more efficient. However, assist hybrids should not be confused with actual mild hybrids like the Chevrolet Silverado Hybrid.

Mild hybrid

Engine compartment of a 2006 GMC Sierra Hybrid

Mild hybrids are essentially conventional vehicles with oversized starter motors, allowing the engine to be turned off whenever the car is coasting, braking, or stopped, yet restart quickly and cleanly. Accessories can continue to run on electrical power while the engine is off, and as in other hybrid designs, the motor is used for regenerative braking to recapture energy. The larger motor is used to spin up the engine to operating rpm speeds before injecting any fuel.

Many people do not consider these to be hybrids at all, and these vehicles do not achieve the fuel economy of full hybrid models. A major example is the 2005 Chevrolet Silverado Hybrid, a full-size pickup truck. Chevrolet was able to get a 10% improvement on the Silverado's fuel efficiency by shutting down and restarting the engine on demand. Mild hybrids often use 48 volt systems to supply the power needed for the startup motor, as well as to compensate for the increasing number of electronic accessories on modern vehicles.

General Motors followed the pickup truck hybrid with their Belt alternator starter (BAS) hybrid system, used in the 2006 Saturn VUE Green Line. It operates in much the same manner as the "start-stop" system in the Silverado, but the electric motor can also provide modest assist under acceleration.

Plug-in hybrid

File:New Vehicle Purchase Preference.gif
The number of US survey respondents willing to pay $4,000 more for a plug-in hybrid car increased from 17% in 2005 to 26% in 2006.

Template:Main A plug-in hybrid electric vehicle (PHEV) is a full hybrid, able to run in electric-only mode, with larger batteries and the ability to recharge from the electric power grid. They are also called gas-optional, or griddable hybrids. Their main benefit is that they can be gasoline-independent for daily commuting, but also have the extended range of a hybrid for long trips. They can also be multi-fuel, with the electric power supplemented by diesel, biodiesel, or hydrogen. The Electric Power Research Institute's research indicates a lower total cost of ownership for PHEVs due to reduced service costs and gradually improving batteries. The "well-to-wheel" efficiency and emissions of PHEVs compared to gasoline hybrids depends on the energy sources of the grid (the US grid is 50% coal; California's grid is primarily natural gas, hydroelectric power, and wind power). Particular interest in PHEVs is in California where a "million solar homes" initiative is under way, and global warming legislation has been enacted.

Prototypes of PHEVs, with larger battery packs that can be recharged from the power grid, have been built in the U.S., notably at Prof. Andy Frank's Hybrid Center[9] at UC Davis and one production PHEV, the Renault Kangoo, went on sale in France in 2003. DaimlerChrysler is currently building PHEVs based on the Mercedes-Benz Sprinter van. Light Trucks are also offered by Micro-Vett SPA[10] the so called Daily Bimodale.

The California Cars Initiative has converted the '04 and newer Toyota Prius to become a prototype of what it calls the PRIUS+. With the addition of 300 lb of lead-acid batteries, the PRIUS+ achieves roughly double the gasoline mileage of a standard Prius and can make trips of up to 10 miles using only electric power.[11] Plug -in Hybrid are like Series Hybrids.

Joseph J. Romm and Prof. Frank co-authored an article, "Hybrid Vehicles Gain Traction", published in the April 2006 issue of Scientific American, in which they argue that PHEVs will soon become standard in the automobile industry.

See also: vehicle to grid

Hydraulic hybrid

A hydraulic hybrid vehicle uses hydraulic and mechanical components instead of electrical ones. A variable displacement pump replaces the motor/generator, and a hydraulic accumulator (which stores energy as highly compressed nitrogen gas) replaces the batteries. The hydraulic accumulator, which is essentially a pressure tank, is potentially cheaper and more durable than batteries. Hydraulic hybrid technology was originally developed by Volvo Flygmotor and was used experimentally in buses from the early 1980s and is still an active area.

Initial concept involved a giant flywheel for storage connected to a hydrostatic transmission, but it was later changed to a simpler system using a hydraulic accumulator connected to a hydraulic pump/motor. It is also being actively developed by Eaton and several other companies, primarily in heavy vehicles like buses, trucks and military vehicles. An example is the Ford F-350 Mighty Tonka concept truck shown in 2002. It features an Eaton system that can accelerate the truck up to highway speeds.

Pneumatic hybrid

Compressed air can also power a hybrid car with a gasoline compressor to provide the power. MDI in France produces such air cars (See video). An Australian company invented a highly efficient air engine which may make pneumatic hybrid vehicle more competitive. A team led by Tsu-Chin Tsao, a UCLA mechanical and aerospace engineering professor, is collaborating with engineers from Ford to get Pneumatic hybrid technology up and running. The system is similar to that of a hybrid-electric vehicle in that braking energy is harnessed and stored to assist the engine as needed during acceleration.

High-Power Biodiesel Hybrid

The newest hybrid still yet to reach the market is the High-Power Biodiesel Hybrid (HPBH). These cars run on a hybrid engine with a mix of fuels and have excellent fuel efficiency and power. In 2006, Students from Philadelphia created a HPBH car which used soybean fuel that could go from 0-60 mph in 4.0 seconds and still achieve 50 MPG.[6]

The different hybrid modes

Hybrid modes.gif

Engines and fuel sources

ICE-ICE Hybrid

Template:Cleanup-date Nearly all motor vehicles use some form of Internal Combustion Engine, and this includes the current hybrid-electric cars such as the Prius. A basic efficiency problem of the ICE motor is that they must provide enough power for acceleration and this generally requires over 100 horsepower (75 kW). However, the amount of power needed for a typical 3000 pound (1350 kg) vehicle may be less than 5 horsepower (3.7 kW) when running 60 mph (95 km/h) on level roads ( one term for this is Road-Horsepower ). It is very inefficient to run a large spark-ignition (i.e. gasoline) engine under such a light load. So, in an ICE-ICE hybrid a second small motor might be used at cruising speeds. This might be wired into the common electric cruise control which many cars already have. The small motor's horsepower could be chosen with a goal of ability to allow the vehicle to climb slopes up to 5 degrees since few roads are truly level for even short distances. For simplicity, the small motor could have a single fixed gear ratioed to run most efficiently at a defined speed range such as 60-75 mph (95-120 km/h).

This system would be more efficient than manufactured systems with cylinder shut-downs since those systems still have large amounts of friction - the shut-down cylinders are still running. The late Frank-Winchell of General Motors may have done work with the ICE-ICE hybrid, perhaps it is unpublished. Advantages of ICE-ICE hybrids over Petroleum-Electric hybrids would be greater range and less weight. One of the worst design flaws of the ICE-Electric vehicles is overall vehicle weight in part due to heavy batteries. But, the real waste is that 90% of the time, there is only one person in a 4-8 passenger 3000-5000 pound vehicle. Making a large hybrid for single person commuting is a misleading waste no matter how clever the technology. In 2002 Volkswagen showed it's "One Litre Car" running concept which got over 200 mpg, weighed only about 600 pounds, was crashworthy and carried 2 people. However, the acceleration was very slow -- but with a second larger motor for acceleration it could actually be quite sporty and still use very little fuel -- as an ICE-ice hybrid. A similar petroleum-electric ultralight tandem seater, the 2005 Daihatsu UFE-III could be made into an ICE-ICE hybrid for far greater range without the anchor of batteries. Also, because both of the these vehicles are only one-person wide they have a small frontal area coupled with a low drag shape. So, both are Naero vehicles ( Narrow, Aerodynamic ). Keep in mind that the bigger something is, the more energy it will take to move it, and there is no magic method to avoid it. Anytime anyone claims superb energy efficiency, watch out for wild claims of super-high mileage, usually those are based on driving on very flat ground, with no hills and no accelerating from a start.

Gasoline

Gasoline engines are used in most hybrid designs, and will likely remain dominant for the foreseeable future. While petroleum-derived gasoline is the primary fuel, it is possible to mix in varying levels of ethanol created from renewable energy sources. Like most modern ICE-powered vehicles, hybrids can typically use up to about 15% bioethanol. Manufacturers may move to flexible fuel engines, which would increase allowable ratios, but no plans are in place at present.

Nowadays petroleum gasoline engines can use directly biobutanol (see direct biofuel).

Diesel

One particularly interesting hybrid vehicle combination uses a diesel engine for power. Diesels are excellent at delivering constant power for long periods of time, suffering less wear while operating at higher efficiency. The Diesel engine's high torque, combined with hybrid technology, may offer performance in a car of over 100 mpg US (2.35 litres/100 km).

Nowadays most diesel vehicles, and therefore the diesel part of hybrids, have the advantage they can use 100% pure biofuels (biodiesel), so they can use but do not need petroleum at all.

Diesels are not widely used for passenger cars in the United States, as US diesel fuel has long been considered very "dirty", with relatively high levels of sulfur and other contaminants in comparison to the Eurodiesel fuel in Europe, where greater restrictions have been in place for many years. Despite the "legally allowed" dirtier fuel, the US has tough restrictions on exhaust, and it has been difficult for car manufacturers to meet emissions levels given what is put into the engine. However, ultra-low sulfur diesel is set to be mandated in the United States in October 2006.

PSA Peugeot Citroën offers PSA Peugeot Citroën has unveiled two demonstrator vehicles featuring a diesel-electric hybrid powertrain: the Peugeot 307 and Citroën C4 Hybride HDi (PDF).

VW made a prototype diesel-electric hybrid car that achieved 2 litres/100 km (118 mpg US) fuel economy, but has yet to sell a hybrid vehicle.

General Motors has been testing the Opel Astra Diesel Hybrid.

Hybrid Orion VI Metrobus

So far, production diesel-electric engines have mostly just appeared in mass transit buses. Current manufacturers of diesel-electric hybrid buses include New Flyer Industries, Gillig, Orion Bus Industries, and North American Bus Industries. In 2008, NovaBus will add a diesel-electric hybrid option as well.

Hydrogen

The ECD company is reported to have converted a Toyota Prius to run on hydrogen fuel.

BMW plans to offer a 7 Series car that runs on both petrol and hydrogen (see bivalent).

In 2005, New Flyer Industries introduced a concept for a hydrogen-electric powered mass transit bus known as the HE40LF [7].

Fuel cells

Template:Main Some fuel cell-powered vehicles currently in development use some hybrid-like technology to store auxiliary energy. Like diesels above and steam power outlined below, fuel cells are best at delivering a fairly constant flow of electricity, so having a secondary system is helpful. In some cases, batteries have been replaced with ultracapacitors, which can store and retrieve energy quickly, but are inappropriate for long-term electrical storage.

Turbines and steam engines

From the 1950s to the 1970s Chrysler created several turbine-powered vehicles, though only small numbers were produced; they had complex drivetrains and achieved relatively slow starting speeds, with effects reminiscent of "turbo lag", but demonstrated that turbines could be used for automobiles (see Chrysler Turbine engines). Also, in late 1990s General Motors made a gas turbine series hybrid prototype based on now-cancelled EV1 electric vehicle. At present, no current or announced mass-market car is driven by a gas turbine or a steam engine, but hybrid technology could bring back gas turbines and the steam-powered car.

Both gas turbines and steam turbines (see below) are lighter than reciprocating steam and internal combustion engines, respectively, and more efficient than the corresponding reciprocating types when operating at their optimum power output. On the other hand, they have very limited optimum power output ranges, and must be used with electric drive or some other sort of transmission. Operation of turbines outside of their optimum power output ranges drastically reduces their efficiency. This is not prohibitive for a ship or aircraft that is mostly operated at very constant power output, or for a power plant containing many turbines that can be put on-line or off-line as needed to match load, but has resulted in near-eradication of turbine engines from land vehicles.

In the early 20th century, cars made by the Stanley Steamer Company with reciprocating steam engines did compete successfully with the internal combustion engine. Reciprocating steam engines have a much larger range of operating speeds than do internal combustion engines, including the ability to produce full torque at stall, thus eliminating the need for a transmission; however, they have not been able to compete with internal combustion for land vehicles for several reasons:

  • Lower thermal efficiency possible with today's materials — a heat engine such as an internal combustion engine or steam has efficiency limited by its Carnot cycle temperature differential. A steam engine must transfer combustion heat through the material of the boiler, which therefore must be able to withstand the heat, while an internal combustion engine can bypass this limitation by having the piston and cylinder materials always remain at much less than the combustion temperature (at the cost of some loss of efficiency due to unwanted cooling of the combustion gas).
  • Longer warm-up time and slow throttle response — this is no great problem for trains and ships which are restricted from quick acceleration by their huge mass and which also generally have predictable demand for power, but is a challenging issue for automobiles, trucks, and buses
  • More complex controls — the driver of a Stanley Steamer had to keep a close eye on several pressure and temperature gauges while driving (on the other hand, with modern computers, much of this could be handled automatically)

Gas turbine (or other internal combustion engine), steam turbine, and hybrid technology could be combined to alleviate the disadvantages of gas turbines and steam engines while retaining most of their advantages. In combined cycle power plants, gas turbines drive generators, and their exhaust is used to generate steam for steam turbines, thus recovering some of the energy from the heat of the exhaust that would otherwise be wasted. This principle can be used in vehicles, and is currently in use in ships as COGAS or COGES[8], although the only public proposal for such technology in an automobile uses a conventional internal combustion engine for this purpose instead of a gas turbine[9] (a configuration that has also seen use on ships). A combined cycle gas turbine/steam turbine (or internal combustion engine/steam turbine) set could be combined with hybrid technology to allow the combined cycle system to operate at its most efficient power output. The energy storage system would store energy from the combined cycle system when its output exceeds propulsion requirements and provide energy to the propulsion system when propulsion requirements exceed the combined cycle system output, including combined cycle system startup. The energy storage system would need to have an especially high capacity to work well with a combined cycle system, since the combined cycle system would operate inefficiently during startup and shutdown; therefore, the energy storage system would need to support long intervals between combined cycle startup and shutdown.

Hybrid fuel

In addition to vehicles that use two or more different devices for creating motive power, some also consider vehicles that use distinct energy input types (fuels) to be hybrids, although to avoid confusion with hybrids as described above, these are better described as dual mode vehicles:

Human power

Motorized bicycles use human pedal power and an attached motor. Some bicycle conversion kits aided popularisation of "hybrid" vehicle bicycles that used electric hub motors (such as Bionx[12] and Wilderness Energy[13]), internal combustion engines (such as the 1940s "Pixie" bicycle motor), and pedal power. Such machines include electric bicycles and mopeds, which may often be simultaneously propelled by human and engine power. More sophisticated constructions are three wheeled and provide at least a windscreen (ZAP EPOD, TWIKE).

Benefits

File:Graph median3.png
Median mpg (US) with boxplot from GreenHybrid.com

Benefits of the hybrid design include:

  • The internal-combustion engine in a hybrid vehicle is much smaller, lighter, and more efficient than the one in a conventional vehicle, because the engine can be sized for slightly above average power demand rather than peak power demand. A standard combustion engine is required to operate over a range of speed and power, yet its highest efficiency is in a narrow range of operation - in a hybrid vehicle, the engine operates within its range of highest efficiency. The power curve of electric motors is better suited to variable speeds and can provide substantially greater torque at low speeds compared with internal-combustion engines.
  • Like many electric cars, but in contrast to conventional vehicles, braking in a hybrid is controlled in part by the electric motor which can recapture part of the kinetic energy of the car to partially recharge the batteries. This is called regenerative braking and one of the reasons for the high efficiency of hybrid cars. In a conventional vehicle, braking is done by mechanical brakes, and the kinetic energy of the car is wasted as heat.
  • Hybrids are much more energy efficient than traditional internal combustion engine vehicles because they generally provide greater fuel economy. This statistic has a major implication for the reducing petroleum consumption and vehicle air pollution emissions worldwide[14]
  • Reduced wear and tear on the gasoline engine.
  • Reduced wear on brakes from the regenerative braking system use.
  • Reduced noise emissions resulting from substantial use of electric engine at low speeds, leading to roadway noise reduction and beneficial noise health effects. Note, however, that this is not always an advantage; for example, people who are blind or visually-impaired, and who rely on vehicle-noise while crossing streets, find it much more difficult to do safely.
  • Reduced air pollution emissions due to less fuel consumed per travel mile, leading to improved human health with regard to respiratory and other illness. In fact composite driving tests indicate total air pollution of carbon monoxide and reactive hydrocarbons are 80 to 90 percent cleaner for hybrid versus conventional vehicles[10].
  • Increased driving range without refueling or recharging, compared with electric vehicles and perhaps even compared with internal-combustion vehicles. Limitations in range have been a problem for traditional electric vehicles.

Incentives

In order to encourage the purchase of hybrid vehicles, several incentives have been made into law in the United States:

  • Starting January 1, 2006, the purchase of hybrid cars qualifies for a tax credit up to $3400 on the purchaser's Federal Income Taxes. The tax credit is to be phased out two calendar quarters after the manufacturer reaches 60,000 new cars sold in the following manner: it will be reduced to 50% ($1700) if delivered in either the third or fourth quarter after the threshold is reached, to 25% ($850) in the fifth and sixth quarters, and 0% thereafter.
  • Hybrid purchases before January 1, 2006 qualify for a tax deduction on the IRS 1040 form. In 2003 hybrid owners qualified for a $2000 deduction; the deduction reduces by $500 each year until it reaches zero. HR 1308 Sec. 319 proposed the phasing out of the deduction to put on hold for the year 2004 and 2005; (i.e., hybrid car buyers can enjoy the $2000 deduction before the phasing-out resumes at $500 in 2006).
  • Many states give additional tax credits to hybrid car buyers
  • Certain states (e.g., New York, California, Virginia and Florida) allow singly-occupied hybrid vehicles to enter the HOV lanes on the highway. Initially, the Federal Highway Administration ruled that this was a violation of federal statute[15] until August 10 2005 when George W. Bush signed the Transportation Equity Act of 2005 into law.
  • Some states, e.g. California, exempt hybrid cars from the biennial smog inspection, which costs over $50 (as of 2004).
  • Hybrid cars can go on certain toll roads for free.
  • The city of San Jose, CA issues a free parking tag for hybrid cars that were purchased at a San Jose dealership. The qualified owners do not have to pay for parking in any city garage or road side parking meters
  • City of Los Angeles, CA offers free parking to all hybrid vehicles starting on October 1 2004. The experiment is an extension to an existing offer of free parking for all pure electrical vehicles.
  • In October, 2005, City of Baltimore, MD started to offer discount on monthly parking in the city parking lots, and is considering free meter parking for hybrid vehicles. On November 3 2005, the Boston Globe reports that the city council of Boston is considering the same treatment for hybrid cars.
  • Annual vehicle registration fees in the District of Columbia are half ($36) that paid for conventionally vehicles ($72).
  • Drivers of hybrid vehicles in the United Kingdom benefit from the lowest band of vehicle excise duty (car tax) which is based on CO2 emissions. In London, these vehicles are also exempt from the £8 ($14) daily congestion charge in central London. Hybrid divers also benefit from a discount in their insurance if they are insured with "MORE TH>N" who recently announced a discount for hybrids drivers in the UK of up to 13 per cent.

Trade-offs

In some cases, manufacturers are producing hybrid vehicles that use the added energy provided by the hybrid systems to give vehicles a power boost, rather than significantly improved fuel efficiency compared to their traditional counterparts.[16] The trade-off between added performance and improved fuel efficiency is mainly something controlled by the software within the hybrid system. In the future, manufacturers may provide hybrid-owners with the ability to set this balance (fuel efficiency vs. added performance) as they wish, through a user-controlled setting.[17] Toyota announced in January, 2006 that it was considering a "high-efficiency" button.

It has been observed that the success of the hybrid systems comes despite the need to carry two complete power systems. In a poorly designed car this might increase the weight and size and therefore greater losses in acceleration and aerodynamic drag, although the Prius is lighter and more aerodynamic than many other cars. In fact, the relative desirability of this concept rests on the deficiencies of the two underlying systems; the unfavorable torque curve of the internal combustion engine, referred to above, and the lack of a system of storing and delivering electrical power with anything near the energy density of combustible liquid fuels, so that a fuel tank, internal combustion engine, and generator together still represent a better source of electrical power than the equivalent weight and volume of batteries. In the event of relatively large leaps forward in battery or fuel cell technology, the internal combustion portion of the hybrid will become superfluous. Somewhat less likely is the possibility of a change in the general popular mode of automobile use largely supplanting short trips by use of mass transportation, so that the majority of automotive operation becomes steady speed cruising rather than stopping and starting; this would eliminate the advantage gained from regenerative braking and the low rpm torque boost of the electrical portion of the hybrid, and allow very small forced induction internal combustion engines to become viable competitors of the heavier hybrid systems.Template:Citeneeded

Skeptics claim that mechanics are not fond of working on hybrid vehicles due to added complexity, but the Toyota mechanics in Atlanta and other U.S. cities say they are delighted by the cars, and hundreds of enthusiastic engineer-owners gather on the Internet and in clubs. The complexity may result in greater repair costs, although hybrid manufacturers typically encourage buyers with generous warranties so this has not yet affected end users. These vehicles have been available for ten years and the lifespan and resale values are good Template:Citation needed. Hundreds of thousands are in use, but Toyota reports very few problems with battery packs. One additional problem is the lack of towing hook, the hybrid cars have limited power resources so often they can´t be used for high power applications like towing boats.

Disposal is an additional issue. By its nature, a battery must be made of reactive chemicals; the more power density the battery offers, the more reactive the chemicals it contains. However, all discarded hybrid vehicles will be returned for proper recycling and disposal; dealers and mechanics are trained for this, and rigorous regulations are in effect. Virtually all automobile batteries in the U.S. are recycled, and the environmental effects of leachates from the small number of hybrid battery packs that are not recycled will be no worse than they are from ordinary automobile batteries. (The Prius battery pack is only a little larger than the starter battery.)

Finally, the typical hybrid vehicle is more expensive than corresponding non-hybrids (e.g., Civic vs Civic Hybrid). Although the variables involved are many, those more concerned about economics than the environment might steer away from hybrids in favor of traditional economy vehicles, as they would result in a lower cost in most cases.

Hybrids vs. electric vehicles

Battery powered all-electric cars (BEVs) are more popular in Europe than in the U.S. (Most European electric vehicles are purchased from manufactures, while due to unavailibilty of manufactured vehicles, most U. S. vehicles are owner produced conversions of older conventional vehicles.) The major U.S. automobile manufacturers argue that customer demand for pure electric cars is small. In addition, the long suburban commutes common in the U.S. make range an important criterion for electric vehicle design. However, if advances in battery technology allow increased range at comparable cost to gasoline-powered vehicles, manufacturers will likely mass-market electric vehicles. The relative cost of gasoline to an equivalent amount of electrical energy will also be a critical factor in the electric vehicle market.

For now, car manufacturers are focusing on fuel cell-based cars and hybrids. Fuel cell vehicles are being developed in a long-term research environment, rather than with expectations of production at any defiinite time. Toyota intends all of its vehicles to have a hybrid option by 2012.Template:Citeneeded

Plug in

After market plug in kits are available for some hybrids from third party manufacturers. See Plug-in hybrids above.

Other hybrid vehicles

Railpower[18] offers hybrid road switchers, as does GE.[19] Diesel-electric locomotives may not always be considered hybrids, not having energy storage on board, unless they are fed with electricity via a collector for short distances (for example, in tunnels with emission limits), in which case they are better classified as dual-mode vehicles. In addition, the United States Army's manned ground vehicles of the Future Combat System all use a hybrid electric drive consisting of a diesel engine to generate electrical power for mobility and all other vehicle subsystems.

  • PML Mini QED A British engineering firm has put together a high-performance hybrid version of BMW's Mini Cooper. The PML Mini QED has a top speed of 150 mph, a 0-60 mph time of 4.5 seconds. The car uses a small gasoline engine with four 160 horsepower electric motors — one on each wheel. The car has been designed to run for four hours of combined urban/extra urban driving, powered only by a battery and bank of ultra capacitors. The QED supports an all-electric range of 200-250 miles and has a total range of about 932 miles (1,500 km). For longer journeys at higher speeds, a small conventional internal combustion engine (ICE) is used to re-charge the battery. In this hybrid mode, fuel economies of up to 80mpg can be achieved. http://www.pmlflightlink.com/

See also

External links

General

Hybrid powertrains

Hybrids in logistics

Hybrids in public transport


References

  1. ↑ Electric motors can in general also be used as generators, depending on the applied voltage, direction of current flow, and the phase of commutation in the motor. The principal difference between a motor and a generator is one of design optimization only. See also motor-generator
  2. ↑ Template:Cite book
  3. ↑ Template:Cite web
  4. ↑ Template:Cite web
  5. ↑ Template:Cite web
  6. ↑ Template:Cite web
  7. ↑ Template:Cite news
  8. ↑ Template:Cite web
  9. ↑ Template:Cite web
  10. ↑ Template:Cite web
  11. ↑ Template:Cite web
  12. ↑ Template:Cite web
  13. ↑ Template:Cite web
  14. ↑ Template:Cite web See included and referenced graph.
  15. ↑ Template:Cite web
  16. ↑ Hybrids: More Power, Less Fuel - Business Week, September 20, 2005.
  17. ↑ Hybrid Cars Losing Efficiency, Adding Oomph - National Geographic, August 8, 2005.
  18. ↑ Template:Cite web
  19. ↑ Template:Cite web
Retrieved from "http://woiweb.com/wiki/index.php?title=Hybrid_vehicles&oldid=23514"