Search results

...of [[engine capacity]] equal to 1300 cm³, after the previous experience on monoblock [[Fiat]], is implemented in full in aluminium by Bandini, a circuit lubrica * Materials and particularity: [[base]] monoblock to 5 [[media bench]] and league cup d '[[aluminium]], [[head]] alloy[[DOHC]

...ater also used for testing the first version of the engine 1300 cm ³ based monoblock [[Fiat]]. ...erico, distribution chain with trees to tenditore cams on roller bearings, monoblock and [[base]] to five [[media bench]] in a single fusion and sump alloy of a

..., a medium-economic with a conventional type design and a [[unilateral]] [[monoblock]] [[valve]]d [[engine]], did not have much success.

...he [[Tipo]] C 25/35 5700 HP had been also been equipped with a 5700 of cm³ monoblock. The model 16/20 HP came constructed in a sport version that participated t

...erico, distribution chain with trees to tenditore cams on roller bearings, monoblock and [[base]] to five [[media bench]] in a single fusion and sump alloy of a

...hanical) | head]] alloy [[aluminium]], 8 valves, chamber burst hemisphere, monoblock and [[base]] to five [[media bench]] unique alloy custed, sump in [[alumini

...nes. It is estimated that about 1,500 were produced from these prestigious monoblock engines.

*Front Brake: Two Brembo radial "monoblock" calipers with four 34 mm pistons; two semi-floating 320 mm x 6 mm discs, w

...ersion taxi, monoblock, 1570 cc, the 12/14 HP, biblocco, 2111 cc, on 15 HP monoblock, 2614 cc, the 16/20 HP biblocco, 3054 cc, the 28/40 HP biblocco, 7964 cc, t

|[[Motor]] ||anteriore, longitudinal, monoblock; head (brought back) in [[cast iron]] (of the type to flows intercrosses to |Width=20%| [[Motor]] ||anteriore, longitudinal, monoblock; head (brought back) in cast iron (of the type to flows intercrosses to you

...nes. It is estimated that about 1,500 were produced from these prestigious monoblock engines.

|width=20%| [[Motor]] ||anteriore, longitudinal, monoblock; head in two pieces, with an inferior part (in cast iron) containing the va |width=20%| [[Motor]] ||anteriore, longitudinal, monoblock; head in two pieces, with an inferior part (in cast iron) containing the va

| FRONT BRAKE || 2 x 300mm Braking WAVE rotors, radial monoblock Brembo Racing calipers with 4 pistons and 2 pads

...th [[base (mechanical) | basement]] [[aluminium]] to five [[media bench]], monoblock and [[Head (mechanical) | head]] to two valves per [[Rod (mechanical) | cyl

|width=20%| [[Motor]] ||Tipo “88” front, longitudinal, monoblock; head (brought back) smontabile in special cast iron; base in aluminum; cra |width=20%| [[Motor]] ||Tipo “88” front, longitudinal, monoblock; head (brought back) smontabile in special cast iron; base in aluminum; cra

*Front Brake: Two Brembo radial "monoblock" calipers with four 34mm pistons; two semi-floating 320mm x 6mm discs, with

...up (approximately 80 Kg) and of compact dimensions, also if with the motor monoblock realized in cast iron to thin walls in order to avoid the resource to alumi