Ferrari 250 LM
Although Enzo Ferrari resisted the move for road use, Ferrari began producing mid-engined racing cars in 1963. Although these cars shared their names (based on engine displacement) with road models, they were almost entirely dissimilar. The first mid-engined Ferrari road car did not arrive until the 1967 Dino, and it was 1971 before a Ferrari V12 was placed behind a road-going driver in the 365 GT4 BB.
250 P
The 250 P racer was almost entirely unrelated to the other 250 cars. It was a mid-engined sports car racer with a 250 Testa Rossa V12 engine. The car was produced in 1963 and won the 12 Hours of Sebring, 24 Hours of Le Mans, and the manufacturers' championship.
250 LM
At the November 1963 Paris Auto Show, Ferrari introduced the 250 LM (Le Mans). It was developed as a coupé version of the 250 P and was ostensibly a new production car intended to meet FIA homologation requirements for the Group 3 GT class. The intention was for the 250 LM to replace the 250 GTO as Ferrari's premier GT-class racer. However, in April 1964 the FIA refused to homologate the model, as Ferrari had built considerably fewer than the required 100 units. The 250 LM thus had to run in the prototype class until it was homologated as a Group 4 Sports Car for the 1966 season.
32 total 250 LM chassis were built from 1963 to 1965, with all but the first chassis (s/n 5149, the Paris Auto Show car with a 250 P engine) powered by 3.3-liter 320 bhp (238 kW) engines as used in the 275 P. According to Ferrari naming convention, the 3.3 litre cars should have been designated "275 LM", however Enzo Ferrari insisted that the name remain 250 LM in order to facilitate the homologation process. The 250 LM shared fully independent double wishbone suspension, rack and pinion steering, four wheel disc brakes and 5-speed transaxle with the 250 P, however the tubular space frame chassis was significantly strengthened with the roof structure, additional cross-bracing and heavier gauge tubing. The interior was trimmed out as a nod to the ostensible production status of the car, but ultimately it was little different from a prototype racer.[3][17][18]
The 250 LM was successfully raced around the world by both factory-supported and privateer racers. Unlike the 250/275/330 P cars, new 250 LMs were sold to private customers and campaigned by privateer teams. From 1964 through 1967, 250 LMs were raced by Scuderia Ferrari, NART, Maranello Concessionaires, Ecurie Filipinetti, Ecurie Francorchamps and others, even when this model was no longer competitive with the latest factory prototypes.[19][17][20] Notably, a 250 LM (chassis 5893) entered by the North American Racing Team won the 1965 24 Hours of Le Mans driven by Jochen Rindt and Masten Gregory. This remains Ferrari's last overall victory in the endurance classic.[21][22] This car is now owned by the Indianapolis Motor Speedway Museum and was displayed at the 2004 Pebble Beach Concours d'Elegance and the 2013 Amelia Island Concours d'Elegance.[23][24]
The 250 LM is highly sought-after by serious auto collectors and individual cars are often featured at auctions, car shows and historic racing events. 250 LMs typically sell for more than $10 million USD and auction records for this model have been repeatedly broken in the past 10 years.
330 P
The 250 P was stretched in 1964 to accept the 4.0 L 330 engine, becoming the 330 P.
330 P2
An entirely new car, the 330 P2, followed in 1965. It was first used by Luigi Chinetti's North American Racing Team (NART) at Daytona that year. It was powered by a 410 hp (305 kW) version of the 330 V12.
330 P3
The 1966 330 P3 introduced fuel injection to the Ferrari stable. It also used a an P3 (Type 593) transmission that was prone to failure and was replaced by a ZF transmission when the P3 were converted to 412P's, another Ferrari first that would only last one season when the ZF's were replaced by 603R P4 transmissions in the 412P's.
330 P4
1967 was a banner year for the Enzo Ferrari motor company, as it saw the production of the mid-engined 330 P4,[1] a V12-engined endurance car intended to replace the previous year's 330 P3. Only four Ferrari P4-engined cars were ever made: three new 330 P4s and one ex P3 chassis (0846). Their three-valve cylinder head was modeled after those of Italian Grand Prix-winning Formula One cars. To this was added the same fuel injection system from the P3 for an output of up to 450 hp (335 kW).
The P3 won the 1000 km Monza in 1966, and the P4 won the same race in 1967. Two P4s, and one 412 P crossed the finish line together (in first 0846, second 0856, and third place 0844) in the 1967 24 Hours of Daytona, for a photo finish to counter Ford's photo of the Ford GT40 Mk.II crossing the finish line together First, Second, and Third at the 1966 24 Hours of Le Mans.
Since then, the fate of these four cars has been the subject of much attention.
- 0846. Built in 1966 as the first of 3 works 330 P3s and the only P3 Spyder. Retained by the works at the end of 1966 and used as the basis for the new P4 and partially converted to P4 specification for 1967. Ferrari states 0846 no longer exists. It was decided by the factory to scrap the chassis due to its previous accident history and fire damage sustained at Le Mans, 1967. The original chassis number has been written off Ferrari's books as an existing chassis, but the number is still in their ownership. Template:Fact
- 0856 was originally built as a Berlinetta but converted by the factory into a Spyder for Brands Hatch, 1967 as it remains today. Currently owned by Lawrence Stroll.
- 0858 was originally a Berlinetta but converted by Ferrari into a Spyder for Brands Hatch, 1967 and later in the year converted into a 350 Can-Am by them. Now fitted with a P4 Berlinetta body and is in German ownership.
- 0860 was also originally a Berlinetta and converted to a Spyder for Brands Hatch, 1967 and like 0858 converted by Ferrari to a 350 Can-Am but was fitted with a P4 Spyder body in the early 1970s by its then French owner in whose family it remains today.
412 P
The Ferrari 412P was a "consumer version" of the famous 330 P3/P4 race car, built for independent teams like Scuderia Filippinetti. These cars had carburetor engines instead of the factory Lucas fuel injection. Surviving 412P cars are worth approximately US$ 6 million nowadays.