Search results

• Brake fade
  ...Brake fade can be a factor in any [[vehicle]] that utilizes a [[friction]] braking system including [[automobile]]s, [[truck]]s, [[motorcycle]]s, [[airplane]] Brake fade is caused by a buildup of heat in the braking surfaces and the subsequent changes and reactions in the brake system compo
  10 KB (1,643 words) - 20:15, 20 August 2009
• Semi-automatic transmission
  ...arrangement for a linear [[actuator]], which uses [[brake fluid]] from the braking system to impel a hydraulic cylinder to move the main clutch actuator. [[Category:Automotive transmission technologies]]
  4 KB (699 words) - 23:28, 3 July 2009
• Hydropneumatic suspension
  '''Hydropneumatic''' is a type of [[automotive]] [[suspension (vehicle)|suspension system]] invented by [[Citroën]] and f ...spheres. Because the pressure there is proportional to the load, so is the braking power.
  16 KB (2,430 words) - 23:46, 7 August 2009
• Hand brake
  ...is is usually used in concert with a [[parking pawl]] in the transmission. Automotive safety experts recommend the use of both systems to immobilize a parked car ...h front wheel cars, led to a tendency for the rear wheels to lock up under braking, which led to [[Oversteer|the rear of the car slewing sideways and loss of
  8 KB (1,350 words) - 00:20, 22 February 2011
• Disc brake
  ...ment. Unlike a drum brake, the disc brake has no self-servo effect and the braking force is always proportional to the pedal force being applied by the driver ...ng brake]] or [[emergency brake]]. As the front brakes perform most of the braking effort, this can be a reasonable compromise.
  14 KB (2,301 words) - 09:07, 18 September 2009
• Electronic Stability Control
  ...lity Control, which is the more common term recognized by the [[Society of Automotive Engineers]], although individual motor manufacturers use a range of differe ESC compares the driver's intended direction in [[steering]] and braking inputs, to the vehicle's response, via lateral [[acceleration]], rotation (
  11 KB (1,566 words) - 09:26, 7 October 2009
• Limited slip differential
  ...hen the cam is forced to rotate forward due to forces from braking, engine braking, etc.. it will just contact a flat "wall" and the casing will not expand. ...uire more force to move the casing apart. Therefore, only during Very hard braking will it have enough force pushing it forward to expand the casing.
  7 KB (1,085 words) - 09:05, 8 October 2009
• Run flat tires
  == Technologies == ...rly repaired, which may result in an extra fee if the repair is done at an automotive repair shop.
  10 KB (1,554 words) - 09:57, 12 December 2009
• Brake bleeding
  [[Category:Automotive braking technologies]]
  7 KB (1,236 words) - 07:56, 16 July 2009
• Car safety
  ...]] (EBD), which prevents the brakes from locking and losing traction while braking. This shortens stopping distances in almost all cases. ...ithout contributing to [[unsprung weight]] and wheel bounce, which degrade braking, handling and ride, and increase mechanical loads.
  14 KB (2,148 words) - 11:11, 7 July 2009
• Passive safety
  ...]] (EBD), which prevents the brakes from locking and losing traction while braking. This shortens stopping distances in almost all cases. ...ithout contributing to [[unsprung weight]] and wheel bounce, which degrade braking, handling and ride, and increase mechanical loads.
  14 KB (2,151 words) - 17:35, 7 August 2009
• Shock absorber
  ...through a narrow orifice ([[hydraulic]]s), constitute the vast majority of automotive shock absorbers. An advantage of this type is that using special internal v ...tive tube. Furthermore, many modern hybrid automobiles have [[regenerative braking]], which uses a reversed electric motor to dampen and eventually stop the m
  9 KB (1,376 words) - 22:53, 15 August 2009
• Covini
  ...ean market, as well as for the design of the Callaway]] C7. Outside of the automotive industry, Covini also worked on the Dragonfly Project, which was an attempt ...e public in January 1981 at the [[Geneva Show]]. It was built to test new technologies such as the air-liquid [[intercooler]]. It was the first [[diesel]] road v
  8 KB (1,082 words) - 11:33, 24 February 2011
• Air brake (road vehicle)
  ...es parts of the service [[brake]] and [[parking brake]] systems. Emergency braking systems are required on all semi-trailers by [[Code of Federal Regulations| ===<b>Air brake systems are three braking systems combined:</b>===
  26 KB (4,530 words) - 21:58, 17 August 2009
• Seat belt
  ...aft for the first time in [[1913]] and became common in the [[1930s]]. The automotive seat belt was introduced into the United States by Kenneth Ligon and his br ...unbelted (similar responses have been shown in respect of [[ABS brake|ABS braking]] and, more recently, airbags). It is also possible that the types of inju
  7 KB (1,222 words) - 10:44, 8 October 2009
• Electronic stability control
  ...ies the brakes to help "steer" the vehicle where the driver intends to go. Braking is automatically applied to individual wheels, such as the outer front whee ...ion control system]]s. Traction control works by applying individual wheel braking and throttle to keep traction while accelerating but unlike ESC it is not d
  27 KB (3,920 words) - 22:51, 15 November 2009
• Electric vehicle conversion
  ...-charge the batteries while braking or travelling down hills (regenerative braking). With the advent of newer technology further features can be expected. ...dling stability is obtained with the single wheel at the back, with normal automotive type front wheel steering, as compared with placing the single wheel in the
  15 KB (2,335 words) - 09:11, 7 October 2009
• Airbag
  The American inventor [[Allen Breed]] then developed a key component for automotive use - the ball-in-tube sensor for crash detection. He marketed this innovat In 1990, the first automotive fatality attributed to an airbag was reported, with deaths peaking in 1997
  24 KB (3,909 words) - 10:43, 8 October 2009
• Lamborghini Sesto Elemento
  ...ive carbon-fiber technologies are being used here for the first time in an automotive application. As a 100 percent subsidiary of AUDI AG, the Italian carmaker a ...in the world to have mastered the complete CFRP process across a range of technologies, from 3D design through simulation, validation, production and testing - al
  20 KB (2,951 words) - 18:16, 12 November 2012
• Front-wheel drive
  * Front wheel drive allows the use of [[left-foot braking]] as a driving technique. [[Category:Automotive technologies]]
  12 KB (1,842 words) - 23:38, 7 August 2009

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)