Ferrari FXX

http://wheelsofitaly.com/lycanmotorwerks/wp-content/i/fxx3.jpg

Ferrari FXX
Manufacturer:	Ferrari
Class:	mid-engined coupe
Production:	2005–
Predecessor:	Enzo Ferrari
Body Styles:	Berlinetta
Engines:	6.2 L V12

The Ferrari FXX is a car that is being developed as part of an unusual development program by automobile manufacturer Ferrari in Maranello Italy.

The car uses some technology developed from the Ferrari Enzo and combines it with some all-new developments from Ferrari and some of the suppliers. However, the car is only a part of the overall program.

The Car

Essentially an evolution of the Enzo Ferrari, the new car will share some components with the Enzo, but significant portions will be all new.

The new car's engine is based on the Enzo's mill but has been expanded to 6.2 liters (from 6.0) and output has been boosted from 660 PS (651 hp/485 kW) to 800 PS (789 hp/588 kW).

The gearbox incorporates the latest developments from Ferrari's F1 program and is expected to complete shifts in under 100 ms. The brakes are uprated and improved over the original Enzo though they retain the same ceramic disk technology.

The tires will be 19 in (483 mm) slicks custom-developed for the car.

As with the Enzo, the seat will be custom fit to the user and the pedals will likewise be positioned to their exact requirements.

In addition, the car will be provided with a comprehensive data-monitoring and telemetry that will not only allow the drivers to improve their performance but will also provide Ferrari technicians with valuable data to improve not only this vehicle but future road-going Ferraris as well.

Specifications

• Engine: Longitudinal, Mid-mounted, 65°, normally-aspirated aluminum V12
• Valvetrain: DOHC, 4 valves per cylinder with continuously variable timing
• Fuel system: Bosch Motronic ME7 Sequential Electronic Injection
• Displacement 6.3 L (6262 cc/382 in³)
• Power 800 PS (789 hp/588 kW) at 8500 rpm
• Specific Output: 127.75 PS (126 hp/94 kW) per litre
• Drive system: RWD w/TCS
• Transmission: 6-Speed Semi-Automatic
• Construction: Carbon fiber body over carbon fiber tub with rear alloy subframe
• Front brakes: Brembo CCM (carbon-ceramic) discs w/6-pot calipers, power assist ABS
• Rear brakes: Brembo CCM (carbon-ceramic) discs w/4-pot calipers, power assist, ABS
• Front wheels: 483 mm (19 in) x 229 mm (9 in)
• Rear wheels: 483 mm (19 in) x 330 mm (13 in)
• Steering: Rack and pinion with power assist
• Suspension: Double wishbones with push-rod actuated coil-shock units, adaptive dampers, electronic shock absorbers, anti-roll bar
• Wheelbase: 2650 mm (104 in)
• Front track: 1660 mm (65 in)
• Rear track: 1650 mm (65 in)
• Length: 4702 mm (185 in)
• Width: 2035 mm (80 in)
• Height: 1147 mm (45 in)

References

• Template:Web reference

[[Category:Ferrari vehicles|FXX]